Skip to content

Solutions

Adhesive dispensing equipment, rebuilds & training

Everything you need to keep a 1K or 2K adhesive or sealant dispensing process running, from new equipment to professional rebuilds, long-life seal packages and hands-on training.

Dispensing equipment

Since January 2000 we have designed and built dispense units for a wide range of applications. We offer equipment for most adhesives and sealants, and several of our machines have run three to four years in production without a pump failure. That comes from good operator training, customers who pay attention to their process, and matching the pumps or meters to the adhesive.

Materials we work with

  • Urethanes
  • Epoxies
  • Methacrylates
  • Other 1K and 2K sealants and adhesives

Pump, gun & machine rebuilds (any brand)

We have logged more than 800 pump, gun and machine rebuilds, covering many brands, and studied the real failure mode behind each one. We do not "just replace parts". If there is a chance to improve the process, we do it, and we tell you what we found so the same failure doesn't come back. We also repair and redesign units that need more than a rebuild.

Done correctly, a rebuilt pump should run more than a year, and two to four years in some cases. Many customers send us all their rebuilds because the payback shows up as less downtime.

Common causes of failure we find

  • Poorly set gear lash
  • Poor shaft alignment
  • Contaminated isocyanate (moisture-sensitive) side
  • Poor pump and gun rebuild techniques
  • Abrasive material issues
  • Over-pressuring of pumps
  • Excess inlet pressure from the wrong regulator or setting

Parts & seal packages

Based on what we learned from those rebuilds, we developed seal packages and gun components that extend service life. Tell us your equipment and material and we will recommend the right parts for the job.

Training for operators & maintenance teams

Pumps used with high-tolerance, chemically reactive materials are easy to damage during an in-house rebuild. We train plant personnel to rebuild them properly and to run the equipment the right way, and customers often call us for a refresher before doing a rebuild in-house.

Read more about our history and how we approach rebuilds.

Frequently asked questions

Do you rebuild equipment from other manufacturers?

Yes. We rebuild pumps, guns and machines of many brands, and more than 800 of those rebuilds are logged with their actual failure modes.

How long should a professionally rebuilt pump last?

Done correctly, a rebuild should run in excess of one year, and two to four years in some cases. Results depend on the material, the process and how the equipment is operated.

Which adhesives and sealants can your equipment handle?

We routinely work with urethanes, epoxies, methacrylates and other 1K and 2K sealants and adhesives, and offer equipment for most of them.

What if you do not have the right equipment for my application?

We will find the answer or point you to someone who can supply it. A poor answer is sometimes worse than no answer at all.

Have a dispensing problem to solve?

Tell us your material, equipment and what is going wrong. We don't like mysteries.

Contact a dispensing expert